The flange in the shaft flange can be a germplasm, a synchronous belt wheel gear, a steel ball type roller with a sprocket to punch on the spheroid, with a steel ball type, conflict type is The sprocket is sleeve on the copper sleeve, and the thickness of the sprocket does not exceed the scale of "S" on the sample, and the sprocket can be used with ordinary carbon steel.

Classification and distinction can be divided into steel ball, roller and conflict, steel ball and roller-based service life, is good, 38crmoal is difficult to have a bearing processing, so it is more expensive than conflict. Many objects are selected. The installation and installation method is divided into two, the shaft axis is connected to the shaft flange, and the shaft axis is typically a bonded groove and a shaft piercing.

Selection and accounting selection First, according to the torque of the customer, the shaft hole and torque, select the model installation method, the shaft flange, and the axis of shaft. Torque adjustment steel ball type torque scale, according to the scale, the roller ball type and conflict type is adjusted according to their respective graphs, according to the demand side, adjust to himself Torque stop, the torque accuracy is about 5%.

Now the quality of domestic production is basically alternative to imports, and my country's quality China Axle For Vehicles manufacturers excellent price is affordable, and it can be said that my country has been very good at development in the universal axis, which will have more time to choose.  If it is not clear, it can be calculated by formula.

Megosztás a facebookon

The coupling device characteristics of prime mover and working coupling. This will directly affect the choice of coupling type and one of the primary basis for selection.

 

For the stable load and the development situation of the industry, you can choose the rigid elastic pin coupling, otherwise it is better to choose the elastic elastic pin coupling, TL type elastic sleeve pin coupling. 

 

For the two-shaft connection that needs high-speed operation, the structure of the coupling should be considered to have high balance accuracy characteristics to eliminate the vibration and noise generated by the centrifugal force. The rotation speed of the working coupling is high and low.

 

The shaft system connected by the coupling and its operation.. For the connecting shaft system with large mass and large moment of inertia, and frequent starting, shifting or reversing, you should consider selecting a spring-elastic pin coupling that can accept a large instantaneous overload and can buffer and absorb vibration.

 

Among them, the diaphragm coupling has better adaptability to high-speed operation. The types of prime movers are different, and the output power and speed are some stable, some shocks or even strong shocks or vibrations. Increase the relevant drum-shaped Axle For Vehicles Suppliers gear coupling The wear and heat of the gear reduce the transmission quality and service life

Megosztás a facebookon