The flange in the shaft flange can be a germplasm, a synchronous belt wheel gear, a steel ball type roller with a sprocket to punch on the spheroid, with a steel ball type, conflict type is The sprocket is sleeve on the copper sleeve, and the thickness of the sprocket does not exceed the scale of "S" on the sample, and the sprocket can be used with ordinary carbon steel.

Classification and distinction can be divided into steel ball, roller and conflict, steel ball and roller-based service life, is good, 38crmoal is difficult to have a bearing processing, so it is more expensive than conflict. Many objects are selected. The installation and installation method is divided into two, the shaft axis is connected to the shaft flange, and the shaft axis is typically a bonded groove and a shaft piercing.

Selection and accounting selection First, according to the torque of the customer, the shaft hole and torque, select the model installation method, the shaft flange, and the axis of shaft. Torque adjustment steel ball type torque scale, according to the scale, the roller ball type and conflict type is adjusted according to their respective graphs, according to the demand side, adjust to himself Torque stop, the torque accuracy is about 5%.

Now the quality of domestic production is basically alternative to imports, and my country's quality China Axle For Vehicles manufacturers excellent price is affordable, and it can be said that my country has been very good at development in the universal axis, which will have more time to choose.  If it is not clear, it can be calculated by formula.

Megosztás a facebookon

If we ignore this, the accumulation of time will inevitably bring some unnecessary troubles to our production work, and even affect our production process. Therefore, in order to ensure that the universal joint shaft can operate normally during use, and can effectively extend its service life, we must regularly perform some maintenance work on the universal joint shaft.

Today, our universal joint shaft manufacturer will share with you how to do the maintenance work of the universal joint shaft. First of all, when using cardan shafts, pay attention to slow speed. Only by slowly accelerating during use can it be more in line with the use of machinery, so as to reduce unnecessary wear and tear of mechanical equipment. Secondly, it is necessary to check the balance of the universal joint.

Since the balance solder tab is one of the important reasons for stabilizing the balance of the universal joint shaft, this is a very critical step. When we are doing major repairs, we need to be more careful about the relationship between the original assembly. Thirdly, the working condition of the universal joint shaft must be checked every day, so as to ensure the normal operation of the universal joint shaft.

Finally, grease needs to be added regularly. Under normal circumstances, in summer, it is best to inject lithium-based grease, and in winter it is also necessary to inject lithium-based grease. But the only difference is that the number ofChina OEM UF CV Joint Manufacture lithium grease added in these two seasons is different.

In short, if you want the machine to run stably without affecting our production work, in addition to the usual maintenance of the mechanical equipment, you also need to maintain the cardan shaft regularly. Remember that the maintenance work of the cardan shaft is also indispensable. 

Megosztás a facebookon